manualshive.com logo in svg

Fayat BOMAG BW 124 PDH-5, Инструкция по эксплуатации, Инструкция по обслуживанию

Поделиться
Скачать
Fayat BOMAG BW 124 PDH-5 Скачать руководство пользователя страница 10

1.1 

Foreword

BOMAG manufactures machines for earth,

asphalt and refuse compaction, stabilizers/

recyclers as well as planers and pavers.
BOMAG’s vast experience in connection

with state-of-the-art production and testing

methods, such as lifetime tests of all impor-

tant components and highest quality

demands guarantee maximum reliability of

your machine.

These operating and maintenance instructions

are part of your machine.
They provide necessary information to operate

your machine safely and properly.
They also contain information on required oper-

ating, maintenance and repair measures.
Carefully read the operating and maintenance

instructions before taking your machine into

operation.
Please observe the safety regulations strictly

and follow all instructions to ensure safe opera-

tion.
If you are not yet acquainted with the controls

and indicating elements on this machine, you

should thoroughly read the corresponding

chapter

 

Ä

 Chapter 4 „Indicators and control

elements“ on page 69

.

The description of the individual operating

steps including the notes on safety to be fol-

lowed can be found in chapter “Operation”

Ä

 Chapter 6 „Operation“ on page 95

.

Before every start up, carry out all required

visual inspections and function tests

 

Ä

 Chapter

5 „Checks prior to start up“ on page 81

.

Ensure the compliance with the specified oper-

ating, maintenance and repair measures to

maintain the functional safety of your machine.

Introduction – Foreword

 

BW 124 PDH-5

 

10

Содержание BOMAG BW 124 PDH-5



















































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды