Fayat BOMAG BW 124 PDH-5 Скачать руководство пользователя страница 129

Страница: 129 / 210

Make sure that the engine cannot be acciden-

tally started during maintenance work.
Thoroughly clean machine and engine before

starting maintenance work.
Before mounting the machine, check whether

all access steps, grips and platforms are free of

obstacles, grease, oils, fuel, dirt, snow and ice.
Use only the intended access steps and grips

to mount the machine.
For overhead maintenance work use the

access steps and working platforms provided

or other secure means.
Do not step on machine parts which are not

intended for this purpose.
Always attach the articulation lock when

working in the area of the articulated joint.
Do not leave any tools or other objects, that

could cause damage, in or on the machine.
After maintenance work has been completed,

dispose of fuels and lubricants, filters, sealing

elements and cleaning cloths in an environ-

mentally friendly way.
After all maintenance work is completed rein-

stall all guards and safety installations.
Close all maintenance flaps and doors after

maintenance work has been completed.

The terms right/left are always in

relation to the travel direction.

Maintenance – Preliminary remarks and safety notes

BW 124 PDH-5

129

Содержание BOMAG BW 124 PDH-5



















































































































































































































Результаты поиска

Содержание BOMAG BW 124 PDH-5

Отзывы:

Бренды по названию

Популярные бренды

Fayat BOMAG BW 124 PDH-5, Инструкция по эксплуатации, Инструкция по обслуживанию

Результаты поиска

Содержание BOMAG BW 124 PDH-5

Отзывы:

Бренды по названию

Популярные бренды