Fayat Group DYNAPAC DRP70D Скачать руководство пользователя страница 32

Страница: 32 / 112

3.8 Refuelling

Do not inhale any fuel fumes.

Refuel only with the engine shut down.

Do not refuel in closed rooms.

No open fire, do not smoke.

Ultra-low sulphur diesel fuel poses a higher risk of combustion

caused by the static charging than diesel fuel with a higher sulphur

content.

Apply measures against electrostatic charging.

Do not spill any fuel. Catch running out fuel, do not let it seep into

the ground.

Wipe off spilled fuel. Keep dirt and water away from the fuel.

A leaking fuel tank can cause an explosion. Ensure tight fit of the

fuel tank cover, if necessary replace immediately.

Concerning your safety – Refuelling

DRP70D

Содержание DYNAPAC DRP70D

















































































































Результаты поиска

Содержание DYNAPAC DRP70D

Отзывы:

Похожие инструкции для DYNAPAC DRP70D

Бренды по названию

Популярные бренды

Fayat Group DYNAPAC DRP70D, Инструкция по эксплуатации

Результаты поиска

Содержание DYNAPAC DRP70D

Отзывы:

Похожие инструкции для DYNAPAC DRP70D

Бренды по названию

Популярные бренды