Fayat Group DYNAPAC DRP70D, Инструкция по эксплуатации

Страница: 103 / 112

8. Grip the crank handle with both hands as shown.
9. Turn the crank handle with both hands slowly in the direction
of the arrow until it engages.
CAUTION!
Danger of injury caused by uncontrolled
machine movement!
– Always hold on to a running machine.
– Always keep an eye on a running machine.
10. Then turn the crank handle with increasing speed, until the
engine starts.
Ensure a positive connection between crank
handle and engine by turning it quickly.
Do not interrupt the starting process under
any circumstances.
When the decompression lever closes and
engages (after five revolutions), the highest
speed must be reached.
11. As soon as the engine starts, pull out the crank handle.
12. If the engine does not start during the first attempt, repeat the
starting process.
ð
Always open the decompression lever when repeating
the starting procedure.
NOTICE!
Danger of engine damage!
– Warm up engine for a short while
before starting work. Do not operate
the engine immediately under full
load.
13. Hook the crank handle into the bracket.
14. Close the cover.
NOTICE!
Danger of engine damage!
– Warm up engine for a short while before
starting work. Do not operate the engine imme-
diately under full load.
Fig. 117
B-692-0220
Fig. 118
Troubleshooting – Emergency starting with crank handle
DRP70D 103