Fayat Group DYNAPAC CC234C Скачать руководство пользователя страница 76

Страница: 76 / 174

Operation

4812159901_D.pdf

2023-01-25

Fig. Operator's seat
1. Lock pack- Length adjustment
2. Weight adjustment
3. Back support angle
4. Seat belt

Operator's seat - Adjustment

Adjust the operator’s seat so that the position is
comfortable and so that the controls are within easy
reach.

The seat can be adjusted as follows.

- Length adjustment (1)

- Weight adjustment (2)

- Back support angle (3)

Always make sure that the seat is secure before
beginning operation.

Do not forget to use the seatbelt (4).

Belt reminder

The machine can be equipped with seat belt with belt
reminder.

Unless the seat belt is used, a warning image appear
in the display and a warning buzzer sounds to alert the
driver to use the seat belt.

Содержание DYNAPAC CC234C















































































































































































Результаты поиска

Содержание DYNAPAC CC234C

Отзывы:

Fayat Group DYNAPAC CC234C, Инструкция по эксплуатации, Страница: 76 / 174

Результаты поиска

Содержание DYNAPAC CC234C

Отзывы: