Fayat Group DYNAPAC CC234C, Инструкция по эксплуатации, Страница: 164 / 174

Maintenance - 2000h
4812159901_D.pdf 2023-01-25
3
2
Figure. Hydraulic tank
2. Hydraulic reservoir cap
3. Sight glass
Check the hydraulic fluid level in the sight glass (3)
and top off as required. See under the heading 'Every
10 hours of operation' for more information.
Start the engine and check that the filter does not leak.
Drum - Changing the oil
Fig. Drum, vibration side
1. Drain plug
1
Position the roller with the drain plug (1) straight down.
Place a receptacle that will hold at least 7 liters (7.5
qts) under the plug.
Remove the drain plug (1). Allow all the oil to drain out.
Drain on both drum halves while refilling only is
necessary to do on one of the drum sides. (joint oil
bath)
Deliver the drain oil to environmentally correct
handling. Deliver the drain oil to environmentally correct
handling.
See under the heading 'Every 500 hours of operation'
for filling oil.
Change the oil in both front and rear drum.
152