Fayat Group DYNAPAC CC234C, Инструкция по эксплуатации, Страница: 68 / 174

Machine description
4812159901_D.pdf 2023-01-25
Using the cab controls.
Defroster
To quickly remove ice or mist, make sure that only the
front and rear air nozzles are open.
Turn the heater and fan dial (1 and 2) to max.
Adjust the nozzle so that it blows on the window to be
de-iced, or to remove mist.
1
2 3
4
Heat
If the cab is cold, open the lower nozzle on the front
columns and the middle nozzles just over the controls
for the heater and fan.
Turn to max heat and max fan speed.
When the required temperature has been reached,
open the other nozzles and if necessary turn down the
heat and fan speed.
AC/ACC
NOTE: When using AC/ACC all the windows must be
closed for the system to work efficiently.
To quickly reduce the temperature in the cab, adjust
the following settings on the control panel.
Turn on AC/ACC (3) and set the fresh air (4) in the
lower position to switch off the fresh air valve.
Set the heater control (1) to minimum and turn up the
fan speed (2). Keep only the front middle nozzles in
the ceiling open.
When the temperature has dropped to a comfortable
level, adjust the required temperature on the heater
control (1) and reduce the fan speed (2).
Now open the remaining nozzles in the roof to achieve
a comfortable temperature in the cab.
Reset the fresh air button (4) to the upper position for
fresh air.
56