Fayat Group DYNAPAC CA1300 D, Инструкция по эксплуатации, Страница: 91 / 284

Miscellaneous
4812165001.pdf 2023-05-26
Towing
1
2
Fig. Towing the roller
1. Drawbar
2. Lifting eye
A towing bar must be used when towing, as the
roller has no brakes and can only be slowed and
stopped by the vehicle towing the roller. A towing bar must be used when towing, as the
roller has no brakes and can only be slowed and
stopped by the vehicle towing the roller.
The roller must be towed slowly, max. 3 km/h
(2 mph) and for short distances only,
max. 300 m (330 yards). The roller must be towed slowly, max. 3 km/h
(2 mph) and for short distances only,
max. 300 m (330 yards).
When towing/retrieving a machine, the towing bars (1)
must be connected to both lifting holes (2). Pulling
forces must act longitudinally on the machine as
illustrated. Maximum total pulling force per lifting hole
is 70 kN (15.740 lbf).
Transport
Tie-down and secure the machine according to the
Cargo Securing Certificate for the specific machine
if this is avaliable and applicable.
If not, tie down and secure the machine according to
the cargo securing rules that are valid for the country
where the transport takes place.
Never lash over the machine’s articulated joint,
nor over the machine’s operator platform. Never lash over the machine’s articulated joint,
nor over the machine’s operator platform.
Before securing the machine ensure that :
• the parking brake is applied and in good working condition
• the articulated joint is in closed position
• the machine is centered laterally on the platform
• the lashings are in good condition and fulfills the
corresponding rules for transport securing.
73