Fayat Group DYNAPAC CA1300 D Скачать руководство пользователя страница 191

Страница: 191 / 284

Maintenance measures - 1500 h

4812165001.pdf

2023-05-26

Cab, hinges - Lubrication

Fig. Cab
2. Hinge, cab

Lubricate the hinges (2) on the cab doors with grease.
See lubricant specification.

Air conditioning (Optional)
Fresh air filter - Change

Fig. Cab
1. Fresh air filter (x 1)
2. Screws (x 8)

Use a step ladder to reach the filter (1). The filter
can also be accessed via the right cab window.

There is a fresh air filter (1),
located at the front of the cab.

Undo the eight screws (2) and remove
the protective cover.

Remove the air filter inserts and replace with a new.

It may be necessary to change the filter more often
if the machine is working in a dusty environment.

Air cleaner
Check - Replacement of main filter

Replace the air cleaner's main filter when the
indicator shows red. The indicator is mounted on
the air cleaner's connecting pipe.

173

Содержание DYNAPAC CA1300 D





























































































































































































































































































Результаты поиска

Содержание DYNAPAC CA1300 D

Отзывы:

Fayat Group DYNAPAC CA1300 D, Инструкция по эксплуатации, Страница: 191 / 284

Результаты поиска

Содержание DYNAPAC CA1300 D

Отзывы: