Fayat Group DYNAPAC CA1300 D, Инструкция по эксплуатации, Страница: 54 / 284

Machine description
4812165001.pdf 2023-05-26
No Designation Symbol Function No Designation Symbol Function
11. Strike-off blade, On/Off,
switch When pressed, the strike-off blade is activated.
Controls the position of the strike-off blade. 11. Strike-off blade, On/Off,
switch When pressed, the strike-off blade is activated.
Controls the position of the strike-off blade.
12. Vibration, switch (CA1300) Activates the vibration together with
the switch in the forward/reverse lever. 12. Vibration, switch (CA1300) Activates the vibration together with
the switch in the forward/reverse lever.
13. Electronic speed control
regulator Three-position switch for idling (LOW), fuel
optimization (ECO) and working speed (HI).
N.B.
When starting the machine, the control must be in
idling position (LOW).
13. Electronic speed control
regulator Three-position switch for idling (LOW), fuel
optimization (ECO) and working speed (HI).
N.B.
When starting the machine, the control must be in
idling position (LOW).
14. Direction indicators, switch When depressed to the left, the left
directionindicators are on etc. In the middle
position thefunction is shut off. 14. Direction indicators, switch When depressed to the left, the left
directionindicators are on etc. In the middle
position thefunction is shut off.
15. Parking brake To activate the brakes, press the top of the switch
to change the position of the lever.
To disengage the brakes, press down the red part
at the same time as the switch, and change the
position of the lever.
NOTE: When starting the machine, the parking
brake must be activated. 15. Parking brake To activate the brakes, press the top of the switch
to change the position of the lever.
To disengage the brakes, press down the red part
at the same time as the switch, and change the
position of the lever.
NOTE: When starting the machine, the parking
brake must be activated.
16. Horn, switch Press to sound the horn. 16. Horn, switch Press to sound the horn.
17. Hazard beacon, switch Where depressed, the hazard beacon is on 17. Hazard beacon, switch Where depressed, the hazard beacon is on
18. Warning lamp, low fuel level The lamp goes on if the fuel level
in the diesel tank is low. 18. Warning lamp, low fuel level The lamp goes on if the fuel level
in the diesel tank is low.
19. Warning lamp,
water temperature The light comes on if the water temperature is
too high. Stop the engine immediately and locate
the fault. 19. Warning lamp,
water temperature The light comes on if the water temperature is
too high. Stop the engine immediately and locate
the fault.
20. Warning lamp, oil pressure This lamp lights if the lubricating pressure in the
engine is too low. Stop the engine immediately and
locate the fault. 20. Warning lamp, oil pressure This lamp lights if the lubricating pressure in the
engine is too low. Stop the engine immediately and
locate the fault.
21. Fuel level Shows the fuel level in the diesel tank. 21. Fuel level Shows the fuel level in the diesel tank.
22. Warning lamp, parking brake The lamp lights when the
parking brake is activated. 22. Warning lamp, parking brake The lamp lights when the
parking brake is activated.
23. Warning lamp, glow plug The lamp must go out before the starter switch
is moved to position 3c for activation of the starter
motor. 23. Warning lamp, glow plug The lamp must go out before the starter switch
is moved to position 3c for activation of the starter
motor.
24. Hourmeter / Error codes,
engine Displays the number of working hours for the
engine. Any error codes from the diesel engine are
also shown here. 24. Hourmeter / Error codes,
engine Displays the number of working hours for the
engine. Any error codes from the diesel engine are
also shown here.
36