Fayat Group DYNAPAC CA1300 D, Инструкция по эксплуатации, Страница: 123 / 284

Maintenance, 10h
4812165001.pdf 2023-05-26
Fuel tank - Filling
Fig. Filling with fuel
1. Filler pipe
1
Refuel daily with diesel fuel up to the lower edge of the
filler pipe (1). Follow the engine manufacturer's
specification with regard to the quality of diesel fuel.
Stop the diesel engine. Short-circuit (press) the
filler gun against a non-insulated part of the
roller before filling, and against the filler pipe (1)
while filling. Stop the diesel engine. Short-circuit (press) the
filler gun against a non-insulated part of the
roller before filling, and against the filler pipe (1)
while filling.
Never refuel while the engine is running.
Do not smoke and avoid spilling fuel. Never refuel while the engine is running.
Do not smoke and avoid spilling fuel.
The tank holds 117 liters (31.7 gal) of fuel.
Hydraulic reservoir - Check fluid level
Fig. Sight glass hydraulic reservoir
1. Sight glass
1
The sight glass is located on the hydraulic tank in the
engine compartment. It is accessible and visible from
the right side of the roller.
Place the roller on a flat surface and check the fluid
level in the sight glass.
If the level is too low, top up with the type of hydraulic
fluid specified in
the lubricant specification.
Air filter indicator - Resetting
1
Fig. Indicator
1. Button
The air filter indicator is located on the filter,
or in its immediate vicinity.
The air filter indicator must be reset after replacing
the air filter.
Press the "button" (1) on the top of the indicator
to reset.
105