Fayat Group BOMAG BW 226 DH-4i BVC, Руководство по эксплуатации

Страница: 22 / 31

When compacting with vibration you must check the effect on
nearby buildings and underground supply lines (gas, water,
sewage, electric power), if necessary stop compaction work with
vibration.
Do not activate the vibration on hard (frozen, concrete) ground.
Danger of bearing damage!
Park the machine on horizontal, level, firm ground.
Before leaving the machine:
n Straighten the articulated joint to provide easier access to the
machine.
n return the control lever to neutral position
n apply the parking brake
n shut the engine down, pull the ignition key off
n close the cabin
n secure the machine against unintended use.
Do not jump off the machine, but use hand grips and access steps.
Mark machines, which could be in the way, with a clearly visible
sign.
Parking on slopes and inclinations
Secure the machine against rolling, place metal chocks in front of
and behind the wheels. The wheel chocks must be provided by the
operating company.
Do not inhale any fuel fumes.
Refuel only with the engine shut down.
Do not refuel in closed rooms.
No open fire, do not smoke.
Monitor the entire refuelling process.
Do not spill any fuel. Catch running out fuel, do not let it seep into
the ground.
Wipe off spilled fuel. Keep dirt and water away from the fuel.
A leaking fuel tank can cause an explosion. Ensure tight fit of the
fuel tank cover, if necessary replace immediately.
Fire protection measures
Familiarise yourself with the location and the operation of fire
fighting equipment. Observe all fire reporting and fire fighting possi-
bilities.
During the regeneration both the exhaust gas temperature and
quantity will increase.
Keep combustible materials away from hot components (e.g. DBF,
exhaust tube) and exhaust gases, ensure sufficient air supply.
Do not touch hot components or exhaust gases.
Parking the machine
Refuelling
DPF-regeneration
Diesel particulate filter
Safety regulations
BW 226 DH-4i BVC 22