8.
Clean the foam rubber insert in warm soapsuds, rinse and
dry thoroughly.
Do not apply any oil to the foam rubber insert.
9.
Attach the foam rubber insert (2) to the air filter cover (3).
10.
Fasten the paper insert (1) and air filter cover to the housing
and tighten the fastening screws (4), tightening torque: 2.3
Nm (1.7 ft
·
lbf).
11.
Assemble the left hand engine guard again.
8.8.2 Cleaning the machine
NOTICE!
Components may get damaged!
Dirty operating conditions, particularly lubrication oil
and fuel deposits on the cooling fins of the engine and
the cooling air intake opening have an adverse effect
on the cooling of the engine.
–
Immediately seal any oil leaks near cylinders or
cooling air intake.
1.
Park the machine in secured condition
the machine in secured condition.’ on page 55
2.
Allow the engine to cool down.
Fig. 88
Fig. 89
Maintenance – As required
BVT 65
87
Go to
Discount-Equipment.com
to
order your parts
