Fayat Group Bomag BVT 65 Скачать руководство пользователя страница 74

Страница: 74 / 97

11.

NOTICE!
Danger of engine damage!

–

Ensure that the air filter is not damaged.

Screw the air filter cover tightly back in.

12.

Assemble the left hand engine guard again.

13.

Dispose of fuel and filter in an environmentally friendly way.

8.7.3 Cleaning the fuel screen

DANGER!
Danger to life caused by explosive gas-air mixes!

–

Do not allow gasoline to come into contact with hot

components.

–

Smoking and open fire is prohibited.

–

Keep away from heat sources, sparks and other

sources of ignition.

–

Do not spill any gasoline.

Protective equipment:

Working clothes

Protective gloves

Park the machine in secured condition

Chapter 6.4 ‘Park

the machine in secured condition.’ on page 55

Loosen hose clamp (1) and pull the fuel hoses off the fuel

valve (2).

Fig. 63

Fig. 64

Maintenance – Annually

BVT 65

Go to

Discount-Equipment.com

order your parts

Содержание Bomag BVT 65


































































































Результаты поиска

Содержание Bomag BVT 65

Отзывы:

Fayat Group Bomag BVT 65, Инструкция по эксплуатации, Инструкция по обслуживанию, Страница: 74 / 97

Результаты поиска

Содержание Bomag BVT 65

Отзывы: