9
GB
2
1
3
4
Changing the saw
blade
Releasing the saw blade:
Turn screw anticlockwise.
Locking button
On/Off switch
Insert the saw blade in
the ram up to the stop
and
tight the screw of the
retention clip.
Important: Make sure
that the saw blade sits
properly in the slot of the
roller and ram.
Switching on:
Press the On/Off switch
Continuous operation: Lock the On/Off switch with the
locking button
Switching off:
Press the On/Off switch
and release
Turn the speed controller to increase the
cutting rate
Undo the two screws to set the base to an angle of up to
45° on the right or left side.
45°
30°
45°
15°
0°
30°
15°
0°
Anleitung ST 55 E-01 10 spr. 06.11.2001 11:13 Uhr Seite 9
