Faulhaber MC 5010 Скачать руководство пользователя страница 32 | Manualshive

Страница: 32 / 43

Faulhaber MC 5010 Скачать руководство пользователя страница 32

4 Trace

15-04-2016 32 7000.05052

Trigger source (0x2370.01), source 1 to 4 (0x2370.07 to 0A)

The parameters to be recorded, source 1 to source 4, must be entered into the objects
0x2370.07 to 0x2370.0A as pointers to a corresponding object entry (index and sub-index
of the desired parameter). The trigger source must be entered into the object 0x2370.01
as a pointer to a corresponding object entry (index and sub-index of the desired
parameter).

Example:

The object 0x6064.00 (position actual value) must be recorded as the first data source:
The value 0x606400 must be entered into the object 0x2370.07.

Trigger threshold (0x2370.02)

The trigger threshold is entered into object 0x2370.02.

Depending on the settings of bits 1 to 3 in the trigger type object 0x2370.04, recording is
started on the threshold set here being exceeded or undershot.

Trigger delay (0x2370.03)

The trigger delay is stated in object 0x2370.03 as a multiple of the sample time set in
object 0x2370.06.



Delay > 0: Recording is started at a time defined as the set multiple times the sample
time.



Delay < 0: Negative delays can be performed up to the length of the buffer.
Recording ends at the point in the ring buffer where the recording for the current
trigger would have had to start. This ensures that the values recorded before the
trigger are retained.

Trigger mode (0x2370.04)

The trigger type and the type of the data sources are determined by the object
0x2370.04. Bit 0 activates the trigger and thus providing the trigger conditions are
satisfied starts the recording.

Tab. 36: Trigger mode (0x2370.04)

Bit

Entry

Description

0 (LSB)

EN



0: No trigger active



1: Trigger active. Is automatically reset in trigger modes 1 and 3

1
2
3

Edge 0
Edge 1
Edge 2



0: rising flank or trigger > threshold



1: falling flank or trigger < threshold

4 to 5

Reserved

–

6
7

Mode 0
Mode 1



0: No trigger



1: Single shot



2: Repeating

8 to 10

Reserved

–

11
12
13
14
15 (MSB)

Source type 1
Source type 2
Source type 3
Source type 4
Trigger type



0: An object dictionary entry is used as the source



1: Not currently supported

«
...
30
31
32
33
34
...
»

Содержание MC 5010












































Отзывы:

Нет отзывов