Faulhaber 2232***BX4S series, Инструкция по эксплуатации

Страница: 32 / 60

32
Functional Description 4
Motor with SC speed controller 4.3
4.3.4 Parameter settings
The following parameters can be used to adjust the integrated speed controller to the respective
application.
Several parameters have a function in certain configurations only or with specific settings only.
Current limiting values
For the I²t current limiting, the peak current (I
max
) and the motor continuous current (I
Cont
) must be
input. See also section 4.3.5 "Technical Information" . The allowable values of the speed controller
used as well as of the connected motor must be noted and observed.
Parameter Meaning max. value Units
Peak current (I
max
) Value for the maximum current allowed for a short time
(transient maximum current).
3 000* mA
Motor continuous current (I
cont
) Value for the continuous current which is the limit
value.
3 000* mA
* Values depend on motor type. The values can be adjusted if necessary. Note the maximum allowable value
for the motor!
Fixed speed value
For operation with a fixed speed the nominal speed value is input via an adjustable parameter. See
section 4.3.3 "Special Configurations" .
Parameter Meaning max. value Units
Fixed speed value (NsetFix)
Nominal speed value, which is input in operation with
fixed speed.
65 535 rpm
Pulses per motor revolution
It is possible to configure the digital output FG as a frequency output (this is the default
configuration).
Parameter Meaning Possible values Units
Pulses per revolution Number of pulses per revolution at the digital output. 2, 6 1/rev
Maximum speed value
When inputting the nominal speed value (as an analog voltage or as a PWM signal) the speed value,
which is input at 10 V DC or at 100% pulse duty factor, can be set. The maximum speed value can
therefore be adjusted to the application.
Different resolutions of the maximum speed value and different maximum values are possible, de-
pending on the operating mode and motor type.
Parameter Meaning max. value Units
Maximum speed value (NsetMax)
Maximum nominal speed value at 10 V or 100 % pulse
duty factor at the nominal speed value input U
ntarget
.
60 000 rpm