Fastora DAS-208CC, Руководство пользователя

Страница: 21 / 98

21
FASTORA DAS-208CC Disk Array
3.3.2 Operation Mode
Operation mode continuously reports the operating status of the disk array and
the drives connected to it. During normal operation, the LCD display will
continuously show the status of all the major components. Note that the last
character on the second line of the LCD panel with a tiny square moving up
and down, to indicate that the FASTORA DAS-208CC Disk Array is in
operation.
3.3.3 Configuration Mode
Configuration mode is used to modify the settings of disk array. Users can
configure the FASTORA DAS-208CC either through the LCD panel or via a
terminal. Note that you are entering the configuration mode whenever you are
pressing the SEL button during the Operation Mode. If you wish to enter to the
configuration mode from a terminal, simply use the “TAB” key to take you to
your desired mode.
1. You cannot enter the configuration Mode from LCD panel and
Terminal at the same time.
2. You will be prompted to enter your password if the
password-checking feature is enabled. Provide the correct password
to continue your configuration.
Unless the disk array is running the self-diagnose mode, you may select any of
the configuration modes at any time. The configuration mode of FASTORA
DAS-208CC is completely menu-driven for the ease of use. And the menu
options allow you to fine-tune disk array to your specific configuration.