Fastora DAS-208CC, Руководство пользователя

Страница: 15 / 98

15
FASTORA DAS-208CC Disk Array
2.2 Disk Drive Installation
Any 3.5“ SCSI hard disk, half-height 1.6” (4.06cm) or 1” (2.54cm) SCA
connector can be installed into the canister of FASTORA DAS-208CC.
First, refer to the manual that came with the disk drive and set the jumper
instructing the drive to wait for “START UNIT” command. E.g.,
Seagate
calls
this option “Enable Motor Start”;
IBM
calls this option setting “Enable Auto Spin
Up”.
Figure 2-1 shows the disk drive and canister of DAS-208CC Disk Array.
Figure 2-1 Disk Drive and Canister
Second, use four screws to fasten the drive to the drive canister. Please note
that you fasten the drive at the right location. (See Figure 2-2)