Fastfame 9W AP Series, Руководство пользователя

Страница: 16 / 41

9W
▄
AP/P + Serial User’s Manual
2-17
After all connections are made, close the system case cover.
Be sure that all switches are OFF.
Connect the power supply cord to the power supply located on the back of
your system case according to your system user manual.
Connect the power cord to a power outlet that is equipped with a surge
protector.
You may then turn ON your devices in the following order:
(1) Your monitor
(2) External SCSI devices (starting with the last device on the chain)
(3) Your system power For ATX power supplies, you need to switch ON the
power supply if a switch is provided as well as press the ATX power
switch on the front of the case.
The power LED on the front panel of the system case will light. For ATX
power supplies, the power LED will light when the ATX power switch is
pressed. The system will then run power-On tests. While the tests are
running, additional messages will appear on the screen. If you do not see
anything within 30 seconds from the time you turn on the power, the system
may have failed a power-on test. Check your jumper settings and
connections again or call your retailer for assistance.
During power-ON, hold down <Delete> to enter BIOS setup.
Follow the instructions in chapter 3 BIOS Setup
To power off you computer, you must first exit or shut down your operating
system before switching OFF the power switch. For ATX power supplies,
you can press the ATX power switch after exiting or shutting down your
operating system. If you use Windows 95/98, click the start button,
click shut down, and then click Shut down the computer. The power supply
should turn OFF after Windows shuts down. For ATX power supplies, the
message ”You can now safely turn OFF your computer” will not appear
when shutting down the computer.