Fastech Ezi-Servo ALL, Руководство пользователя, Страница: 7 / 100

1.1. General Precaution
7
www.fastech.co.kr
1. Safety Pre-caution
1.1 General Precaution

Contents of this manual are subject to change without prior notice for functional improvement,
change of specifications or user
’s better understanding.

When the manual is damaged or lost, please contact with FASTECH
’s agents or our company at the
address on the last page of the manual.

Our company is not responsible for a product breakdown due to user
’s dismantling for the product,
and such a breakdown is not guaranteed by the warranty.
1.2 Put the safety First

Before installation, operation and repairing the Ezi-SERVO thoroughly read the manual and fully
understand the contents. Before operating Ezi-SERVO please understand the mechanical
characteristics of the Ezi-SERVO and related safety information and precaution .

This manual divides safely precautions into Attention and Warning .
Attention
If user does not properly handle the product, the user may seriously or slightly
injured and damages may occur in the machine.
Warning
If user does not properly handle the product, a dangerous situation (such as an
electric shock) may occur resulting in death or serious injuries.

Although precaution is only a Attention , a serious result could be caused depending on the situation,
Follow safely precautions.
1.3 Check the Product
Attention
Check the product is damaged or parts are missing. Otherwise the machine
may get damaged or the user may get injured.
1.4 Installation
Attention

Carefully move the Ezi-SERVO. Otherwise, the product may get damaged
or user
’s foot may get injured by dropping the product.

Use non-flammable materials such as metal in the place where the Ezi-
SERVO is to be installed. Otherwise, a fire may occur.

When installing several Ezi-SERVO in a sealed place, install a cooling fan
to keep the ambient temperature of the Ezi-SERVO as 50
℃
or lower
.
Otherwise, a fire or other kinds of accidents may occur due to overheating.
Warning

The process of installation, connection, operation, checking and repairing
should be done with qualified person. Otherwise, a fire or other kinds of
accidents may occur.,