background image

Fastbind PUREVa Xt UsER manUal  |  v 1.0  |  © maping Co 2014

6

DRAFT

3. macHIne InsTallaTIon

3. MacHInE InStaLLatIon

Opening the package

handling the Machine

• 

remove the ”brackets” on the bottom of the shipping container 

with a flat head screw driver.

• 

remove the top parts (cover and mantle).

• 

take out the inner carton box.

• 

remove all packaging material around the machine

installing the stOrage lOcker

• 

lift the machine from the pallet and place it on a solid work 

surface. the recommended table height is 90 cm (36 inches) and 

the minimum loading capacity is 200 kg (440 lbs.).

 

o warnIng! 

 

the machine weights 90 kg (198 lbs.).

 

please follow proper lifting guidelines

 

It is strongly suggested that three people are available to 

lift and move the machine safely. safe lifting positions are 

highlighted on the picture in green on both sides of the 

machine.

 

o warnIng!

 

do not lift from the areas marked in red highlight in the 

picture.

 

lifting from the wrong locations can result in personal 

injury and damage to the machine

 

use caution when lifting the machine

• 

the machine is delivered with a separate storage locker.

• 

the storage locker is packages separately and its purpose is for 

storing the glue cartridge gripper tool.

• 

remove the packaging material around the locker.

• 

attach two ring magnets (included in the delivery) to the right side 

of the storage locker around the top screw heads, position marked 

highlighted in green in the image.

 

o warnIng!

 

the storage locker is connected with the ring magnets, 

and will not stay in position if the magnets are not installed 

correctly installed.

 

ensure that the magnets are properly attached before 

locker installation.

• 

Install the storage locker on the left side of the machine so that 

the ring magnets are against the machine’s left side panel and the 

rear edge is against the left end panel.

• 

the storage locker has two compartments and it is intended only 

for storing glue head grippers.

 

o warnIng!

 

The storage locker is not permanently fixed to the 

machine. 

 

remove the locker before moving the machine.

Содержание Pureva XT





















Отзывы: