Fastbind Pureva XT, Руководство пользователя

Страница: 12 / 20

Fastbind PUREVa Xt UsER manUal | v 1.0 | © maping Co 2014
12
DRAFT
7.5 chanching the glue catridge
7. Glue carTrIdGe HandlInG
• table needs to be in down position
• remove thermal casing and heat shield
o warnIng!
▪
when glue cartridge is heating up , all related parts
and surfaces become hot. this includes glue cartridge,
heating dock, glue tank cap and possible glue drops from
glue cartridge. they can be hot for a long time even if
the machine is switched off - or glue cartridge has been
removed
▪
do not toucH any Hot surFace at any tIMe or
you rIsk InJury
▪
do not touch
▪
use the gripper when handling the hot glue cartridge and
cap hook only for glue tank cap.
• place the gripper on glue cartridge by pressing blue locking lid
and push the gripper to its place using the guiding screws marked
in green highlight in the image.
• release the blue locking lid trigger once the cartridge is placed
correctly
• securely hold the gripper with both hands with the blue handle.
• pull the gripper towards you gently until safety latch (highlighted in
red) touches the safety stop
• press the safety latch down, pull the gripper out and store it in the
storage are on the left side of the machine
o warnIng!
▪
If glue cartridge is tilted, the cap can come off and hot
glue can spill out
▪
do not toucH any Hot surFace at any tIMe or
you rIsk InJury
▪
keep the gripper always in upright position.
▪
store the gripper in the locker, making sure it is properly
installed (see locker installation instructions).
7. GLuE cartrIdGE HandLInG
lIsÄÄ KuVaT:
1. KaKsI KorKKIa
2. KorKIn aVausTyöKalu
• Install new cartridge as in section 7.3