background image

Fastbind PUREVa Xt UsER manUal  |  v 1.0  |  © maping Co 2014

20

DRAFT

5. coPyrIGHT, TrademarKs and WarranTy

5. coPYrIGHt, tradEMarKS and WarrantY

cOpyright infOrMatiOn

© 2014 copyright Maping co. reproduction, adaptation or translation 

without prior written permission is prohibited, except as allowed under 

the copyright laws. the information contained herein is subject to 

change without notice.

tradeMarks and patents

One year liMited warranty

cOntact infOrMatiOn

X, y, Z are trademarks of Maping co. Fastbind pureva Xt is invention 

of the Maping co (patent pending).

Maping co warrants this product against defects in material or 

workmanship as follows:

For the period of twelve months from the date of purchase, repair 

or replace free of charge, for the original purchaser, any part or parts 

found by inspection to be defective by our factory authorized service 

outlet or by the manufacturer at Helsinki, Finland. all transportation 

charges on parts submitted for repair or replacement under this 

warranty shall be paid for by the purchaser.

all service under this warranty will be furnished and performed by 

factory authorized service stations or by the manufacturer. warranty 

service does not extend the warranty period.

this warranty is limited to the value of the product and it does not 

cover damage caused by:

• Transportation

• Normal wear and tear

• Neglected or improper maintenance

• Misuse

the warranty will be voided if machine’s type plate has been wholly or 

partially removed or erased.

Maping co is not responsible for any damages, including but 

not limited to direct, indirect or consequential damages, loss of 

material,  profit  or  interruption  of  business.  Maping  Co  may  at  any 

time discharge its warranty by refunding the purchase price and taking 

back the product.

Maping co 

kuusiniemi 10, FIn-02710 espoo, FInland

tel. +358 9 562 6022, Fax +358 9 562 6215

email: [email protected]

www.fastbind.com

Содержание Pureva XT





















Отзывы: