INSTALLATION, OPERATION
AND MAINTENANCE GUIDE
WATER CASSETTES
SETTING THE CLOCK
Press the
CLOCK
button and the corresponding
part of the display starts to blink. Set the actual time using the
HR
(hour)
and
MIN
(minute) buttons. Once this operation has been completed,
confirm the setting by pressing the
SEND
button and listen for the beep
to make sure that the appliance has received the signal.
!
IMPORTANT!
Before setting timed switching on, set the required operating mode
and fan speed. Then switch the air conditioner off.
Fig. 38
Fig. 36
Fig. 40
Fig. 41
ON
OFF
Fig. 42
WARNING! Do not position the
louvers manually as this may
damage the delicate mechanism
that moves them.
!
WALL-MOUNTED CONTROL: CD2/X7
MODE
TEMP
POWER
TIMER
SLEEP
COMP
SW
LV
HR
MIN
START
STOP
SLEEP
MODE
FAN
TEMP
COOL
SLEEP
SLEEP
CLOCK
START
STOP
DRY
HEAT
FAN
Fig. 43
7
8
9
10
10
1
2
3
4
5
6
11
Fig. 37
!
WARNING!
Once the switch on and/or the switch off time is expired, it will be
automatically canceled from the internal memory. Switch on and switch
off time need to be setted each time the user necessitate.
AIRFLOW ADJUSTMENT
The
SW
button activates the louvers and the
airflow is directed alternately upwards and downwards to obtain even
distribution throughout the room.
N.B.: During cooling they should be positioned horizontally. During
heating they should be directed downwards (as hot air tends to rise).
Fig. 39
FAN SPEED ADJUSTMENT
When the
FAN
button is pressed, one of
the following fan speeds can be selected:
AUTO
-
HIGH
-
MED
-
LOW
.
In the
AUTO
mode, the electronic control automatically selects the fan
speed according to the difference between the set temperature and the
room temperature. This function automatically increases the fan speed
if a greater cooling or heating effect is required.
SLEEP MODE
Access this mode by pressing the
SLEEP
button. The
symbol will appear on the display, as shown in the drawing to the side.
The
SLEEP
mode automatically adjusts the temperature to make the
sleeping environment more comfortable during the night.
During the
cooling or dehumidifying modes the set temperature is increased gradually
by 2°C during the first two hours of operation. During the heating mode
the set temperature is decreased gradually by 2°C during the first 2
hours of operation.
Timed switching off can also be set together with the
SLEEP
mode.
TIMED SWITCHING ON
To set timed switching on, the appliance must
be off.
Press the
START
button and the corresponding part of the display starts
to blink.
Set the time for timed switching on using the
HR
and MIN buttons. The
subsequent switching off time may also be set by pressing the
STOP
button and setting the required time using the
HR
and MIN buttons.
Confirm the new setting by pressing the
SEND
button and listen for the
beep to make sure that the appliance has received the signal.
TIMED SWITCHING OFF
To set timed switching off, the appliance must
be on or the timed switching on function must be set. Press the
STOP
button and the corresponding part of the display starts to blink. Set the
time for timed switching off using the HR and MIN buttons. The subsequent
switching on time may also be set by pressing the
START
button and
setting the required time using the HR and
MIN
buttons. Confirm the
new setting by pressing the
SEND
button and listen for the beep to make
sure that the appliance has received the signal.
1
Selects the operating mode in the order given below:
FAN
(fan),
COOL
(cooling),
DRY
(dehumidifying),
HEAT
(heating),
AUTO
(automatic operation)
2
Sets the required temperature between 18°C and 30°C. The
temperature is increased by pressing and .
3 FAN
Selects the fan speed in the order given below:
AUTO
(automatic),
H
(high),
M
(medium),
L
(low)
4
Activates the
SLEEP
mode. This mode automatically adjusts the
temperature in order to provide maximum comfort during the nighttime
hours and save energy.
5
Increases the hours on the display.
15
