Fass TITANIUM SIGNATURE TS-F18-125G, Руководство по установке

Страница: 28 / 39

www.fassride.com
(866) 769.3747
STEP 3:
MOUNT FUEL SYSTEM
NOTE: Before installing fittings make sure to inspect for burs or flare
imperfections. When cutting fuel line make sure to blow out line to
keep debris from moving forward.
NOTE: Always use our dimension O-Ring for water separator, not doing
this could lead to priming issues.
A.
Install 10-300 into the "E" port and 10-30 2 into the "T" port of the FASS, torque to 20 ft./lbs.
***FITTINGS COME EQUIPPED WITH THREAD SEALANT, DO NOT USE THREAD TAPE***
10-302
10-300
B. For fitting purposes , s ecure PBR-2001 to pump assembly lightly with (3) 1/4”-20x1 3/4 bolts and
(3) WA-1001D. Assembly will be used in future steps for correct fitting of brackets. (Note: Bracket may
be flipped to accommodate your application.)
T
T