Fass TITANIUM SIGNATURE TS-F18-125G, Руководство по установке

Страница: 24 / 39

www.fassride.com
(866) 769.3747
STEP 2:
PREPARE SUCTION &
RETURN LINES
P .
VERY IMPORTANT:
Support fuel tank on both ends allowing the natural formation of the
tank to take place. Failure to perform this step will hinder precision installation.
Q . Using a tape measure, measure from the bottom of the fuel tank to the top of the o-ring
sealing surface where the fuel tank module makes contact and take note of the measurement.
Compress fuel tank module to the exact height measurement taken in previous step, measure
and mark FL -100 7 with 1/4- 1/2" clearance from bottom of fuel tank module. Cut FL -100 7 to
length and install onto BHF-1004 with hose clamp HC-1001. NOTE: ACTUAL
MEASUREMENTS WILL VARY FROM IMAGES!
FUEL TANK SUPPORTS