Fass TITANIUM SIGNATURE TS-F18-125G, Руководство по установке

Страница: 16 / 39

STEP 2:
PREPARE SUCTION &
RETURN LINES
www.fassride.com
(866) 769.3747
Some of the photos are of a different application, procedures are the same.
NOTE: Before installing fittings make sure to inspect for burs or flare imperfections. When cutting fuel line make
sure to blow out line to keep debris from moving forward.
Helpful Hint: Directions for removing factory lines.
1. Pull up on the locking tab (either blue or yellow),
2. Push in slightly on the connector,
3. Press down on the release tab,
4. Pull the connector straight off.
A. Before tank is removed or moved, identify ALL areas of clearance between the tank
and the truck’s bed for the best location to install the BHF assembly. With proper
clearance, you want to install it as close to the Fuel sending unit as possible.
B. Remove the filler neck and overflow tubes from the truck by loosening the clamps at both ends.