Fass TITANIUM SIGNATURE TS-F18-125G, Руководство по установке

Страница: 25 / 39

www.fassride.com
(866) 769.3747
STEP 2:
PREPARE SUCTION &
RETURN LINES
R . Install FL-1006 onto OEM engine return barb, this will connect to the metal tube on
the lower section of the fuel tank module. FL-1006 may need to be trimmed to length.
S . Install FL-1006 onto OEM fuel tank module, this is where the FASS will return air/
excess fuel. Place bottom section of FL-1006 into an open area of the fuel tank module
that will not obstruct the fuel level float.
Install FL-1008 onto the 2 open barbs in a
loop to create a cap , these ports are no longer used.