Fasep TOP AUTOMATIC 4.0, Руководство по эксплуатации и техническому обслуживанию

Страница: 66 / 86

OPERATING AND MAINTENANCE MANUAL
RASE.TOP.4028
Code DOC. UM TOP AUTOMATIC 4.0
Rev. 6
Page 66 of 86
66
The ‘Report’ key gives the operator access to a window with the following buttons (Fig. 25):
a) Reports.
b) Consumption and times.
c) Inverter diagnostics.
d) PLC.
e) Reset counters.
Figure 25 – ‘Report’ Window
a) ‘Report’ key
When the ‘Report’ key is pressed, the operator displays the summary of ‘Tyres Completed’
showing the tyres removed since the machine was installed (Fig ) The ‘Tyres Completed’
summary is broken down by wheel diameter and shows two counters: ‘TOTAL’ and ‘STARTED’
The ‘TOTAL’ counter shows the number of removal cycles completed in automatic mode; the
‘STARTED’ counter, the overall number of removal cycles started in automatic mode
Figure 26 – ‘Tyres Completed’ Window