Fasep TOP AUTOMATIC 4.0, Руководство по эксплуатации и техническому обслуживанию

Страница: 25 / 86

OPERATING AND MAINTENANCE MANUAL
RASE.TOP.4028
Code DOC. UM TOP AUTOMATIC 4.0
Rev. 6
Page 25 of 86
25
3 – SAFETY
3.1 – GENERAL WARNINGS
The tyre changer was designed to be safe when used as intended (ref. par. 4.1), so long as it is run,
operated and serviced by following the instructions in this Operating and Maintenance Manual.
Operators are obligated to carefully read the information in this manual, in particular concerning
the appropriate safety precautions listed in this chapter.

Warning
The machine must not be tampered with; contrarily, no liability is
accepted concerning its proper operation or any damage caused by the
product itself.

Warning
Do not use the machine without first reading all instructions in this
Operating and Maintenance Manual. Servicemen and operating
personnel must be suitably trained and informed before beginning any
work.
Moreover, operators are required to comply with the following warnings:
Do not use the machine for any purposes other than its intended purpose (ref. par.
5.1).
Keep the machine and the work area tidy, clean and free of any foreign objects.
Periodically perform all the operations described in the specific section dedicated to
maintenance.
Contact DEVEL S.r.l. for any operations involving repairs, modifications and
extraordinary maintenance.
Check the direction of rotation of the electric motors when the machine is started up
the first time or after any work on the electrical connections or on the power supply
isolating device.
Never open the compartments of the electrical equipment when the machine is
connected to the power supply.
Disconnect the power supply using the dedicated devices before cleaning or
performing ordinary maintenance.