Fasep TOP AUTOMATIC 4.0, Руководство по эксплуатации и техническому обслуживанию

Страница: 30 / 86

OPERATING AND MAINTENANCE MANUAL
RASE.TOP.4028
Code DOC. UM TOP AUTOMATIC 4.0
Rev. 6
Page 30 of 86
30
– Safety rules for the mechanical maintenance engineer
- Before performing any maintenance, make sure the equipment has been disconnected
from all power supplies.
- Make sure no equipment or foreign bodies remain between the moving components of the
machine after performing any maintenance or making any adjustments to prevent
damaging the equipment and/or injuring personnel.
- Restore the safety and emergency devices on the machine when maintenance is complete.
- Always keep the area used for performing maintenance clean and dry, and more
specifically eliminate any oil or grease spots.
- Do not use petrol or inflammable solvents such as detergent; always use non-hazardous
commercial solvents.
- Do not use compressed air to clean components; if it is impossible to use other systems,
protect yourself with goggles with side guards and limit the pressure to a maximum of 2
bar.
3.7.3 – Safety rules for the electrical maintenance engineer
- Ensure the electrical components have been disconnected from the supply line before
doing any work on them.
- After any work on the electric panel or related wiring, close the safety guards properly
before restoring the power and starting up the machine.
Only allow qualified personnel who has been properly trained
and informed on the aforesaid activities to service the equipment
(both mechanical and electrical).