Fasep TOP AUTOMATIC 4.0, Руководство по эксплуатации и техническому обслуживанию

Страница: 31 / 86

OPERATING AND MAINTENANCE MANUAL
RASE.TOP.4028
Code DOC. UM TOP AUTOMATIC 4.0
Rev. 6
Page 31 of 86
31
4 – HANDLING AND INSTALLATION
Carefully read this chapter before installing the machine.
The machine installers must work carefully and ensure unexpected
events do not occur, and must have the skills required to select the
components for connecting to power supplies.
This machine must be installed in a suitable area, while complying with
the instructions set forth in this chapter.
The machine is ready to be handled (completely assembled with all its
components) with the assistance of a fork-lift truck equipped with hook
(or other hoisting equipment). When required, directly contact the
Manufacturer, who will provide all the information and support
necessary to work in safe conditions.
Any defects arising from installation not performed according to the
rules of the trade release FASEP from any liability concerning subsequent
malfunctioning and damage.
Contact the Manufacturer if the machine requires handling and
reinstalling in another location.
4.1 – PREPARATIONS THE CUSTOMER IS RESPONSIBLE FOR
The user is responsible for preparing:

The installation premises, as prescribed by current local legislation regulating health and
safety at the workplace;

Supplying electrical energy, in compliance with the current regulations at the installation
site;

An efficient earthing system;

An isolating switch with automatic protection against short circuits, earth faults and
electrostatic discharges between the electric power supply line and the machine.