Fasep TOP AUTOMATIC 4.0, Руководство по эксплуатации и техническому обслуживанию

Страница: 29 / 86

OPERATING AND MAINTENANCE MANUAL
RASE.TOP.4028
Code DOC. UM TOP AUTOMATIC 4.0
Rev. 6
Page 29 of 86
29
3.6 – PERSONAL PROTECTIVE EQUIPMENT
As a precaution, machine operators are recommended to wear the following personal protective
equipment:

gloves that protect against the risk of cuts, abrasions

safety footwear

safety goggles

protective clothing with tight cuffs
3.7 – SAFE WORK PROCEDURES
Machine operators using the machine must monitor the danger zone, avoid starting the tyre
removal/fitting operations if persons who are not involved in the work are within the danger
zone or immediate vicinity.
If the operator needs to completely or partly disable certain safety
devices for particular work involving servicing, inspecting or
repairing the tyre changer or parts of it, he/she is responsible for
immediately restoring the proper operation of the components
themselves at the end of the work.
3.7.1 – Safety rules for the operator
- Use the machine for the purposes and under the operating conditions specified in this
Operating and Maintenance Manual.
- Perform the periodic maintenance checks indicated in this Operating and Maintenance
Manual.
- Monitor all elements subject to possible wear and tear. This is particularly important for all
moving mechanical components and for all cables and wiring, especially those with a high
operating voltage or pipes containing pressurized fluids.
- Periodically check the operation of all active devices such as valves, emergency buttons,
warning lights, control devices, isolating devices, etc.
- Always keep the electric panel closed;
- Clean and tidy up the work area at the end of a work cycle.
Protective housings may only be removed for maintenance
requirements and must be repositioned before resuming
operation of the system or its equipment.