Fasep TOP AUTOMATIC 4.0, Руководство по эксплуатации и техническому обслуживанию

Страница: 52 / 86

OPERATING AND MAINTENANCE MANUAL
RASE.TOP.4028
Code DOC. UM TOP AUTOMATIC 4.0
Rev. 6
Page 52 of 86
52
BEADING THE TYRE:

USE LEVER 3 ON THE CONTROL PANEL TO MOVE THE UPPER TOOL UNIT (a)
DOWNWARD UNTIL THERE IS CONTACT BETWEEN THE UPPER TOOL UNIT
AND THE TYRE’S UPPER BEAD

USE LEVER 2 ON THE CONTROL PANEL TO MOVE THE TECNOSERVICE UNIT
(b) DOWNWARD AND MANUALLY POSITION THE FIRST BEAD PRESSER (c)
AND THE SECOND BEAD PRESSER (d) CLOSE TO THE EDGE OF THE RIM.

GUIDE THE BEADING OF THE TYRE BY HOLDING THE PIN (e) WITH THE LEFT
HAND AND PRESSING ON THE ANTI-CLOCKWISE ROTATION PEDAL (REF.
FIG. 13). USE LEVER 2 ON THE CONTROL PANEL TO MOVE THE
TECNOSERVICE ARM AWAY FROM THE WHEEL WHEN THE BEADING
OPERATION IS COMPLETED.
3
c
e
d
e
d
c
a
b
2 3