Fasep FZ63/3S, Руководство по эксплуатации и обслуживанию

Страница: 19 / 38

Use and Maintenance Manual
– Spare Parts
Page 19
PROBLEMS – CAUSES - SOLUTIONS
PROBLEMS CAUSES SOLUTIONS
Not working Main switch on "0
”
position
Put switch on
“I” position
Transformer fuses or
general protection fuses
blown
Replace the blown fuses
Electrical system
fault Check the efficiency of the
connections.
Control micro Check the micro is placed
at the centre of the cam as
described in Fig. 4
– Cable
assembly
Descent is extremely
slow The choke is not working
properly Clean the choke
Tubes blocked Clean the tubes
The motor is rotating
properly but the lift is
not working or very
slow Oil solenoid valve blocked
in the open position Clean solenoid valve
Filter clogged Clean filter
Piston gasket worn or
damaged Replace gasket
Pump worn or damaged Check the efficiency of the
pump
and replace, if
necessary