Fasep 2000 srl
Rev. 1.1
Balatron B350.G3
10 September 2012
4-1
F
IG
.
9
F
IG
.
10
F
IG
.
11
4
CALIBRATION
NOTE:
the following symptoms indicate need for calibration:
a) check calibration program fails.
b) constant low or high weight readings.
c) indicated point of umbalance constantly wrong.
d) more than 2 spins required to balance wheels repeatedly.
4.1
How to calibrate the Wheel Balancer B350-T
Switch on the wheel balancer.
Press
<SET>
when
SOF
X.XX
(software
version) is displayed.
Spin the empty shaft (see the picture 9).
Place the truck flange (see the picture 10).
Put the calibration weight as shown in the
picture 11.
End of calibration.
Press
<MODE/ESC>
to return to normal balancing mode.
