Fasep 2000 srl
Rev. 1.1
Balatron B350.G3
10 September 2012
C-2
C:
Errors and Malfunctions recognized by the Computer
Errors may apply to some model only.
ERR 1:
Shaft does not rotate
ERR 2:
Rotation Direction is wrong
ERR 3:
Rotation speed is not ready
ERR 4:
Rotation speed is wrong (too low or too high)
ERR 5:
Position Sensor or Position Disk failure
ERR 6:
Safety cover is open
ERR 7
:
Measuring cycle was interrupted
ERR 8:
Calibration weight was not inserted.
ERR 9:
Activaction code not correct
ERR 10:
Overflow in calculations
ERR 11:
Serial number is wrong
ERR 12:
Serial number not inserted
ERR 13:
Printer not connected
ERR 14:
Uncorrect password
ERR 15:
E²prom error
ERR 16:
Calibration memory error
ERR 17:
Rod in uncorrect position
ERR 18:
Excessive weight detected
ERR 19:
Reserved
ERR 20:
Reserved
ERR 21:
Error in inputting data
ERR 22:
Brake error
ERR 23:
Reserved
ERR 24:
The shaft is opened or the air pressure is not
sufficient.
Scheme Pneumatic System Lifter
