Fasep 2000 srl
Rev. 1.1
Balatron B350.G3
10 September 2012
7-1
F
IG
.
35
: first spin, rim only
F
IG
.
36
: Second spin, complete wheel
6
HOW TO OPTIMIZE UMBALANCE OF THE WHEEL
6.1
Measure the umbalance of the rim only. Once the measurement of rim umbalance is calculated, press
<FUNC>
to enter
optimization function.
Mount the tyre on the rim. After mounting the
tyre, the wheel must be put on the shaft in the
same position as before.
Left display (20 in example) indicates present
static umbalance. Right display (55% in
example) indicates possible reduction of weight
in %.
Turn the wheel until SIGN 1 is displayed.
Mark the rim (12 o’clock).
Turn the wheel until SIGN 2 is displayed.
Mark the tyre (12 o’clock).
Put the two marks together to optimize umbalance.
6.2
After pressing
<SET>
, the program return to the measurement of umbalance mode, where an indication of the residual
umbalance values will be given.
