Farymann Diesel 15B Series Скачать руководство пользователя страница 36

Страница: 36 / 110

Diesel engine Series 15B / 18B

Installation and commissioning

2008-09-08

Pos: 6.1 /KN2006-SM/Installation & Inbetriebnahme/001 1 Installation und Erstinbetriebnahme_Titel @ 9\mod_1144393592402_2.doc @ 86334

6 Installation and commissioning

Pos: 6.2 /KN2006-SM/nL---------- Abschnittsende ---------- @ 8\mod_1141997892953_0.doc @ 75473

Pos: 6.3 /KN2006-SM/Installation & Inbetriebnahme/002 1.1 Sicherheit_Titel @ 9\mod_1144395122392_2.doc @ 86369

6.1 Safety

Pos: 6.4 /KN2006-SM/Installation & Inbetriebnahme/003 1.1.0 Personal --> Standard --> ggf. anpassen @ 12\mod_1144395266192_2.doc @ 86376

Personnel

Installation and commissioning may be executed only by

specially trained personnel.

All work on the electrical system must be performed by a

qualified electrician.

Pos: 6.5 /KN2006-SM/nL---------- Abschnittsende ---------- @ 8\mod_1141997892953_0.doc @ 75473

Pos: 6.6 /KN2006-Projekte/Bukh-Farymann/Installation und Inbetriebnahme/1.1 Installation2032 @ 48\mod_1191325974338_2.doc @ 636992

6.2 Installation

Pos: 6.7 /KN2006-Projekte/Bukh-Farymann/Installation und Inbetriebnahme/Schwungrad anbauen 6415 @ 54\mod_1196686152882_2.doc @ 836308

6.2.1 Mounting the flywheel

Must only be performed by a specialist.

Additional protective equipment required:

Safety footwear

Special tool needed:

Torque wrench

Fig. 10

NOTE!

Always check the flywheel nut with a torque
wrench for 216 to 226 Nm before every
installation in or attachment to the machine.

Install engine on suitable mounting.

Turn engine slowly with the crank handle until the keyway (1)
in the crankshaft (3) faces upwards.

NOTE!

This position makes installation of the flywheel
easier.

Place both plate washers (2) on the crankshaft (3).

NOTE!

The flat sides of the plate washers face each other.

Содержание 15B Series















































































































Результаты поиска

Содержание 15B Series

Отзывы:

Бренды по названию

Популярные бренды

Farymann Diesel 15B Series, Руководство оператора

Результаты поиска

Содержание 15B Series

Отзывы:

Бренды по названию

Популярные бренды