Farymann Diesel 15B Series Скачать руководство пользователя страница 18

Страница: 18 / 110

Diesel engine Series 15B / 18B

Safety

2008-09-08

Pos: 2.37 /KN2006-Projekte/Bukh-Farymann/Sicherheit/008 1.1 Sicherheitseinrichtungen 43F (P02032) @ 31\mod_1172221621537_3.doc @ 358700

2.6 Safety

devices

WARNING!
Risk of injury due to non-functional safety
devices!

Safety is only ensured if the safety devices are
intact.

Therefore:

– Check whether the safety devices are functional

and correctly installed before starting work.

– Never deactivate safety devices.

NOTE!

See the Chapter "Design and function" for detailed
information about the position of the safety devices.

Pos: 2.38 /KN2006-SM/nL---------- Abschnittsende ---------- @ 8\mod_1141997892953_0.doc @ 75473

Pos: 2.39 /KN2006-Projekte/Bukh-Farymann/Sicherheit/1.1

Verhalten im Gefahrenfall und bei Unfällen 2032 @ 49\mod_1193128878712_2.doc @ 760971

2.7 Behaviour in the case of danger and accidents

Preventive measures

Always be prepared for accidents or fire.

Keep first aid equipment (first aid kit, blankets etc.) and fire

extinguishers ready to hand.

Familiarise personnel with accident reporting, first aid and

rescue equipment.

Keep access routes clear for rescue vehicles.

Actions in the case of accidents

Operate the EMERGENCY STOP button on the machine (if

present) immediately.

Initiate first aid actions.

Rescue people from the danger zone.

Inform the responsible person at the usage location.

Notify the rescue services.

Keep access routes clear for rescue vehicles.

Pos: 2.40 /KN2006-SM/nL---------- Abschnittsende ---------- @ 8\mod_1141997892953_0.doc @ 75473

Содержание 15B Series















































































































Результаты поиска

Содержание 15B Series

Отзывы:

Бренды по названию

Популярные бренды

Farymann Diesel 15B Series, Руководство оператора

Результаты поиска

Содержание 15B Series

Отзывы:

Бренды по названию

Популярные бренды