Farymann Diesel 15B Series Скачать руководство пользователя страница 16

Страница: 16 / 110

Diesel engine Series 15B / 18B

Safety

2008-09-08

Pos: 2.29 /KN2006-Projekte/Bukh-Farymann/Sicherheit/Gesundheitsgefährdende Stoffe 43F (P02032) @ 31\mod_1172226012495_2.doc @ 358852

Substances harmful to health

WARNING!
Danger of poisoning and danger of skin rashes
and allergies!

Fuels and lubricants contain substances harmful to
health and can result in severe poisoning and skin
rashes or allergies.

Therefore:

– Observe the safety data sheet of the

manufacturer of fuels and lubricants.

– Avoid

spilling

fuels

and fog formation.

– In the case of inhalation, bring affected person

into the open air immediately. Contact a doctor.

– Contact doctor immediately in the case of

swallowing. Rinse mouth thoroughly with water.

– Avoid skin and eye contact:

Apply suitable skin protection cream before
working on tanks, piping or supply
equipment.

Wear protective gloves made of plastic or
rubber during the work.

– In the case of contact with the skin or eyes,

rinse immediately with a lot of water. Contact a
doctor.

– Dispose of contamination in the working area

properly and in accordance with environmental
regulations. Fuels and lubricants must not get
into the sewer system.

– Do not eat, drink or smoke when working.

Pos: 2.30 /KN2006-SM/nL---------- Abschnittsende ---------- @ 8\mod_1141997892953_0.doc @ 75473

Содержание 15B Series















































































































Результаты поиска

Содержание 15B Series

Отзывы:

Бренды по названию

Популярные бренды

Farymann Diesel 15B Series, Руководство оператора

Результаты поиска

Содержание 15B Series

Отзывы:

Бренды по названию

Популярные бренды