manualshive.com logo in svg

Farymann Diesel 15B Series, Руководство оператора

Поделиться
Скачать
Farymann Diesel 15B Series Скачать руководство пользователя страница 13

 

Diesel engine Series 15B / 18B 

 

Safety 

 

 

2008-09-08

  

13 

 

 

Pos: 2.12 /KN2006-Projekte/Bukh-Farymann/Sicherheit/005 1.1 Bestimmungsgemäße Verwendung  43F @ 45\mod_1187809017952_2.doc @ 567587 

 

2.3 Appropriate 

use 

The system is designed and constructed exclusively for the 
intended purpose described here. 

   

The engine is provided exclusively for the intended purpose which 
has been specified and tested by the manufacturer of the 
equipment in which the engine is installed. Any other use is 
considered to be improper. Greaves Farymann Diesel GmbH 
accepts no liability for any dangers and damage resulting from 
this. The risk is borne solely by the user. 

The installation must be made so that all applicable safety 
regulations for the operation of diesel engines are complied with.  

 

Proper use also includes compliance with all the information in this 
operator's manual. 

Any use beyond the intended use and/or other types of use is 
considered misuse and can result in dangerous situations. 

  

 

WARNING!  
Danger due to misuse! 

Misuse can result in dangerous situations.  

Refrain particularly from the following uses of the 
system: 

–  Operation of the engine while it is not in the 

installed condition. 

–  Operation of the engine without sufficient safety 

devices. 

–  Operation of the engine with non-approved 

fuels. 

 

Any types of claims for damage arising from improper use are 
excluded. 

Pos: 2.13 /FI/.......... Seitenumbruch .......... @ 0\mod272_2.doc @ 1523 

Содержание 15B Series















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды