March 2020
www.farmscan.com.au
AM-7500-5
26
Machine Setup
SET SECTION WIDTHS (MULTIPLE SECTIONS)
NOTE: This feature is still under development & not currently required.
Please use the Section Width SIGNLE method as described previously.
1.
Make sure the
Use Section Control
checkbox is ticked.
2.
Select the
Set Section Widths
button.
3.
Select the
Section Size
button.
4.
Enter the Value and Unit for the section widths, and then select
Done
.
5.
Select the
+
button to add sections with a width entered in the previous step.
6.
Select
the
–
button to remove sections.
7.
Select individual sections to modify individual section widths.
8.
Select the green
Tick
button.
THIS COMPLETES THE MACHINE MEASUREMENTS SETUP
1
