March 2020
www.farmscan.com.au
AM-7500-5
21
Machine Setup
BYO PRESSURE SENSOR OR SET MANUAL USER DEFINED VALUES.
As shown below, select the pressure sensor number you wish to calibrate.
Select Type as USER
and then
CALIBRATE.
Repeat procedure if two pressure sensors are installed.
Pressure Low:
Input the lowest pressure the unit will need to display.
Voltage Low:
You can either:
1.
Manually add the
Voltage Low
(as per manufacture specifications), or
2.
Adjust your pressure manually to the low point and then select
SET VOLT.
This will take the value
from the LIVE input voltage and automatically insert.
Pressure High:
Input the highest pressure the unit will need to display.
Voltage High:
You can either:
1.
Manually add the
Voltage High
(as per manufacture specifications), or
2.
Adjust your pressure manually to the High point and select
SET VOLT.
This will take the value from
the input voltage and automatically insert.
