Farmi Forest Mastersplit WP30, Руководство по эксплуатации, техническому обслуживанию и каталог запасных частей

Страница: 29 / 68

MASTERSPLIT WP30
29
MAINTENANCE
In this section of the operating instructions, with in-
dications on how to carry out regular maintenance
and inspections are re¬viewed. We recommend that a
maintenance log book is kept for the machine main-
tenances.
SAFETY INSTRUCTIONS
• Whenever the machine is either serviced or ad-
justment actions are made, the machine must be
placed on a solid base and must be at a standstill.
• When the machine is serviced or adjusted, care
must be taken that either, the machine or operati-
on engine or tractor cannot accidentally turn itself
on.
LUBRICATION
The following lubrication schedules are valid when
using the splitting machine on a normal load in a pro-
per environment. If the machine is heavily overloaded,
or used in an unfavorable environment e.g. dusty en-
vironment, shorten the time space between the lub-
rications.
BEARING LUBRICATION
Grease the following bearings after about 100 running
hours with general grease.
• Conveyor driving roller bearing (UCFL 205, 1 pcs.)
• Back support roller bearings (UCFL 205, 2 pcs.)
OTHER LUBRICATION
At regular intervals (approx. every 100 hours), check
that the mechanism of the machine’s operating lever
is sufficiently lubricated.
CHANGING THE OIL
The following oil change schedules are valid when
using the splitting machine with a normal load in a
proper environment. If the machine is heavily overlo-
aded, or used in an unfavorable environment e.g. dus-
ty environment, shorten the time interval between
the lubrications.
NOTE! Do not use biodegradable oil in the machine.
Biodegradable oils can damage hydraulic compo-
nents.
The manufacturer does not assume any liability for
machine damage resulting from such operating
faults!
COMBUSTION ENGINE (Mastersplit PM)
Change combustion engine lubrication oils according
to the manufacturer’s recommendation. (Please also
read the separate instructions manual.)
MULTIPLIER GEARS (Mastersplit TR)
Change the oil every 1000 hours or at least once per
year, whichever interval expires first. Fill the PTO gear
with 2.5 dl oil, e.g. Shell Donax TD 10W-30.
HYDRAULIC OILS
The first oil change must be performed after six months
or after 100 hours, afterwards every 12 months or 500
hours. Fill the tank with 40 l oil. NOTE! The oil tempe-
ratures must not exceed over 80
o
C during operati-
on.
Fill in the oil through the filler neck on the top of the
tank. The oil must reach at least to the center of the
combined oil level gauge/thermometer. NOTE! Only
replenish hydraulic oil of the 32, 32S class or an equi-
valent oil.
OIL LEVEL CHECK
Always check the hydraulic oil level from the gauge be-
fore using the splitting machine.
CHAINSAW MAINTENANCE
• Blade chain and chain flange removal and fitting
• Blade chain sharpening
CAUTION!
!