Farmi Forest Mastersplit WP30, Руководство по эксплуатации, техническому обслуживанию и каталог запасных частей

Страница: 4 / 68

MASTERSPLIT WP30
4
GENERAL INFORMATION
MASTERSPLIT WP36 is designed for one person.
Only one person at the time can connect the machine
to its power source. Hazardous area around the ma-
chine is 10 m. When the machine is being connected
or operating nobody should access this area apart
from the machine’s operator.
This manual is intended for people who have previous
experience with agricultural and forest machinery. To
operate the firewood processor it is necessary to have
a common knowledge and know-how concerning the
forest industry.
Any modifications which have been made on this
machine without authorization may void the the
manufacturer’s liability in case of damage resulting
from such modifications.
GENERAL WARNING SYMBOL
The general warning symbol marks
the complete safety-related infor-
mation contained in this manual.
When this symbol is shown, please
beware of potential dangers which may lead to inju-
ries or accidents. Carefully read the text next to the
symbol.
All illustrations of this manual, instructions and
technical data are based on the latest details
of the firewood processor’s structure known at
the time of publication. MASTERSPLIT WP36 -
machine is continuously being developed and the
manufacturer reserves the right for any changes wit-
hout prior notice.
It is possible to solve and repair any malfunctioning
that may occur by following the instructions in-
side the manual. Should you be unable to repair
the machine, please contact the manufacturer.
(Contact details may be found in the WARRANTY sec-
tion).
THE USE OF THE MACHINE AND THE OPERATING
RULE
MASTERSPLIT WP36 is a semi-automatic wood split-
ting machine which may be used for cutting and split-
ting pre-adjusted lengths of stems, logging- and sawing
remnant, clean construction timber waste etc.
The wood to be split is lifted on a feed table which will
places the wood in the chainsaw.
An optional wood loader can be used to load the
trunks directly from the ground onto the feed table.
The length of the trunk to be loaded should be 2 m at
least and 4 m at most.
The feed table consists of two scale surfaced plates,
one of the plates moves simultaneously with the split-
ting ram.
The feed table is operated by the machine’s operating
lever.
When the operating lever is pulled to-
wards the operator, the sawing action begins.
When the operating lever is pushed away from the
operator, the conveyor table moves forward, thus fee-
ding wood to be cut and simultaneously splitting the
wood onto the splitting chute. The machine has been
equipped with an automatic rapid movement valve
which will speed up the process by over 40%. alas
reducing the splitting power.
The feed table will return to its normal position by re-
turning the operating lever to the off-position or when
the sawing action is restarted.
The cutting action is completed by a hydraulic chain-
saw which rotates only when sawing is in progress.
The cut wood falls onto the splitting chute and the
splitting ram pushes it forward to a cross blade which
then splits the wood. The height of the cross blade can
be adjusted as needed. The conveyor moves the pro-
cessed wood onto a pile.
CAUTION!
!