19
│
40
Manual
TRITON 450 PS
|
600 PS
TRITON 450 PS
Parts of the hydraulic system of the machine, which are under pressure, are forbidden to disassemble.
Hydraulic oil that penetrates the skin under high pressure causes severe injuries. In case of injury, seek a
physician immediately
.
2.2
USING THE HYDRAULICS CONTROL PANEL
There is a control panel with up to 4 levers on the drawbar (the number of levers may differ according
to the machine equipment).
Moving the levers opens or closes the ball valves in the hydraulic circuits.
The lever positions according to the pictograms below determine the setting of the hydraulic circuits
for the required function of the machine.
The individual levers are also colour-coded for easier orientation of the operator, in accordance with
the hydraulic circuits controlled by the corresponding lever.
When driving the machine on road, the lever that locks the machine for transport has to
be in the RIGHT position, i.e. locked.
LEVER FOR LOCKING THE MACHINE FOR TRANSPORT
LEFT POSITION
The machine is in the working
position. The
YELLOW
circuit of
the axle and the drawbar piston-
rod are open and the piston-rods
can move. The
RED
circuit is also
open, enabling the lifting and
unfolding of side frames.
RIGHT POSITION
The machine is in the transport
position. The
YELLOW
axle circuit
and the drawbar piston-rod are
closed. The
RED
circuit is closed.
Lifting and unfolding of side
frames is blocked.
