36
│
40
Manual
TRITON 450 PS
|
600 PS
TRITON 450 PS
The table shows individual working depths and the number of brackets needed to achieve the
requested machine depth.
When setting the depth on the transport axle it is also necessary to set the corresponding number of
space washers on the tow bar piston rod based on the chosen working depth.
Mentioned working depths of individual positions are only indicative. They can vary depending on
specific soil conditions. If necessary, add or remove the necessary number of brackets.
The same number of brackets must always be on both piston rods of transport axle!!!
Example:
The tractor has the tow height 60 cm above the ground and we wish to work in chisel depth 20 cm:
1.
Fix 2 large brackets (width 25,4 mm) on both piston rods of axle and further 7 smaller brackets (width
9,53 mm).
2.
On the tow bar piston rod set only 6 space washers as for the tow 60 cm above the ground no further
space washers need to be added (see the table p. 31).
The tractor has the tow height 50 cm above the ground and we wish to work in chisel depth 15 cm:
1.
Fix 2 large brackets (width 25,4 mm) on both piston rods of axle and further 10 smaller brackets (width
9,53 mm).
2.
On the tow bar piston rod set 4 space washers to compensate the lower tow and further 8 space
washers (see the table p. 31).
