31
│
40
Manual
TRITON 450 PS
|
600 PS
TRITON 450 PS
ADJUSTMENT THE DRAWBAR PISTON ACCORDING TO THE TRACTOR HITCH
The number of space washers on the drawbar piston-rod must be adjusted according to the height of
the tractor hitch above the ground.
The number of space washers must be increased by the number stated in the left part of following
table.
The number of space washer can be adjusted, regardless the table, to obtain the parallel position of
the frame with the ground.
Examples:
The tractor tow height is 60 cm above the ground and we wish to work with chisel depth 20 cm:
1.
Set 8 space washers in all roller piston rods.
2.
Set only 6 space washers in the tow bar piston rod (as per the right side of the table) as it is not
necessary to add any space washer for the tow being 60 cm above the ground (see the left part of the
table).
The tractor tow height is 50 cm above the ground and we wish to work with chisel depth 15 cm:
1.
Set 10 space washers in all roller piston rods.
2.
Set 4 space washers in the tow bar piston rod in order to compensate the lower tow (see the left side of
the table for the tow bar piston rod) and another 8 space washers (right side of the table for the tow
bar piston rod).
